-
Only available for dongles registered to Bristol CadCam (transfer possible), and dongle must have an active contract.
-
Sale!
All the Essential Tools
- High powered desktop
- Monitor: 1080p 27"
- Medit T310 Desktop scanner
- exocad flexi core dongle.
-
Sale!
- Highest quality
- Excellent price/performance ratio
- Controller C450
- Tmax 1300C
-
Sale!High precision milling tools for Roland DWX series milling machines. We offer a full range of PMMA/Wax and Zirconia Burs. Get in touch to discuss your needs, we are always happy to help.
-
Roland DWX-42W Wet Mill Filter
ZF2-CLD is a coolant tank filter for the Roland DWX-42W wet mill. Insert the cylinder-shaped filter horizontally in the coolant tank to filter the distilled water and coolant additive mixture while the mill is active. We strongly suggest that users replace the filter on the Roland DWX-42W wet mill once-a-month. -
Only available for dongles registered to Bristol CadCam (transfer possible), and dongle must have an active contract.
-
- High quality
- Excellent price/performance ratio
- Controller B410
- Tmax 1100C
-
Wieland Mini milling tools are high precision milling tools for the Wieland Mini. We offer a full range of PMMA/Wax and Zirconia Burs. Choose from Spectra burs or our exclusive German-engineered CamZero range. Get in touch to discuss your needs, we are always happy to help.
-
Only available for dongles registered to Bristol CadCam (transfer possible), and dongle must have an active contract.
-
LT 5/12 Nabertherm burnout furnace offers a Tmax of 1200C.
- Temperatures are achieved through two ceramic heating plates on either side of the chamber to provide optimal temperature uniformity.
- External temperatures are kept low thanks to a dual shell housing and fiber insulation. The controller present on the furnace is a B410.
- Excellent workmanship
- advanced, attractive design
- highest level of reliability.
-
Sale!Translucency is 49%, so suitable for anterior crownwork. Single crowns in any situation and up to three units in the anterior region. Shades are well matched to the Vita shade guide. Strength is and average of 600 MPa. Click here for VividMax instructions. Click here for quality certification.
-
Only available for dongles registered to Bristol CadCam (transfer possible), and dongle must have an active contract.
-
Nabertherm LHTCT 01 16 Furnace
The Nabertherm LHTCT 01 16 Furnace is a High-Temperature Furnace with SiC Rod Heating for Sintering Zirconia up to 1550 °C- Tmax 1550 °C
- Working temperature 1500 °C, increased wear and tear must be expected in case of working at higher temperatures
- Single-phase connection (LHTCT 01/16)
- Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
- Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2
- Scope of delivery includes a starter set for charging on one level, additional levels as additional equipment
- Adjustable air inlet
- Type S thermocouple
- Controller C450, freely programmable
- Switching system with solid-state-relays, power tuned to the SiC rods
- Easy replacement of heating rods
- Defined application within the constraints of the operating instructions
- NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
-
This white zirconia has strength (1200 MPa) and opacity. Suitable for all frameworks including full mouth. The best choice when full covering power is sometimes needed and only a thin section is possible in the space available. Click here for quality certification. Click here for Vivid user instructions.
-
Please note this is for a flex license
Only available for dongles registered to Bristol CadCam (transfer possible), and dongle must have an active contract. -
Due to their maximum temperature of 1650 degrees C and their large furnace chamber, the high-temperature bottom loading furnaces are perfectly suited for sintering translucent zirconia.
- Motor-driven lifting table significantly simplifies the charging of the high-temperature furnace.
- All-around heating of the cylindrical furnace chamber ensures a very even temperature uniformity.
- Equipped with special heating elements made of molybdenum disilicide, chemical interactions between the charge and the furnace components are optimally avoided.
- The sintered material is placed in saggars made of technical ceramics
- The LHT 02/17 LB offers space for up to three saggars for a maximum of 25 individual crowns per level, thus guaranteeing high productivity.
-
Sale!Roland flat end burs. We stock a range of PMMA/Wax and Zirconia milling tools. Get in touch to discuss your needs, we are always happy to help.
-
Accurate shade determination for natural dentition and a variety of restorations
-
Only available for dongles registered to Bristol CadCam (transfer possible), and dongle must have an active contract.
-
- High-temperature furnace ideally suited for sintering bridges and crowns
- Made of translucent zirconia
- Special heating elements made of molybdenum disilicide promise the best possible protection against chemical interaction between the charge and the furnace components
- Bridges and crowns are loaded in ceramic saggars.
-
Roland DWX (Wet) Milling Tools are high precision milling tools for Roland 4W milling machines. These tools are manufactured in Germany using high precision Swiss mills. Their long life and smooth cutting make these burs a very cost-effective choice for the dental industry. We stock a range of PMMA/Wax and Zirconia burs, get in touch to discuss your needs, we are always happy to talk.
-
Only available for dongles registered to Bristol CadCam (transfer possible), and dongle must have an active contract.
-
Cleaning Tool for DWX-52DC Use the Roland DWX-52DC to remove material waste from all milled dental prosthesis. Place in ATC slot 16 and manually select for use in approved CAM software.
Supplying the UK and Europe with Cutting Edge Digital Technology
Bristol CADCAM is part of the ALS Dental Group, helping to build Europe’s most innovative dental manufacturing business by supporting laboratories and clinics with leading digital dentistry solutions including equipment, software, consumables and training.Â
© Bristol CADCAM Company 2026. All rights reserved · Registered in England and Wales · Company No. 05976692
Registered in England and Wales · Company No. 05976692 · Registered Office: Unit 3, Unicorn Business Park, Brislington, Bristol, BS4 4EX
Privacy – Terms and conditions