- Homogenous distribution of heat inside the sintering chamber
- Fully automatic calibration with guaranteed temperature accuracy (VITA Autoadjust)
- An extended service life and long-term energy-saving operation (VITA Energy Efficiency)
- Gentle sintering of all conventional materials such as white and highly-translucent industrially and manually pre-colored zirconia in all operating modes for consistent and convincing firing results
- HighSpeed sintering in 80 minutes (VITA HighSpeed)
- HighSpeed sintering of bridge frameworks with up to 14 units
- Sintering of all ceramic dental framework materials based on ZrO2 and Al2O3
- Gentle, stress-free sintering in all modes through controlled cooling to 400°C
- Integrated low-temperature pre-drying (VITA PreDry) with a seamless transition to the sintering program
- Optional modular system upgrades for greater flexibility and cost-effectiveness
- Sintering up to 80 units stacked in two levels
-
Includes a total of six instruments for the contra-angle. Includes three instruments each for pre- and high-gloss polishing.
These instruments, which were developed especially for VITA SUPRINITY PC to ensure gentle and careful processing and as a result, the risk of possible formation of microcracks is reduced. -
Only available for dongles registered to Bristol CadCam (transfer possible), and dongle must have an active contract.
-
- High quality
- Excellent price/performance ratio
- Controller B410
- Tmax 1100C
-
A high quality machining wax that burns out cleanly for perfect castings. Also available in the AG shape.
-
Wieland Mini milling tools are high precision milling tools for the Wieland Mini. We offer a full range of PMMA/Wax and Zirconia Burs. Choose from Spectra burs or our exclusive German-engineered CamZero range. Get in touch to discuss your needs, we are always happy to help.
-
Only available for dongles registered to Bristol CadCam (transfer possible), and dongle must have an active contract.
-
LT 5/12 Nabertherm burnout furnace offers a Tmax of 1200C.
- Temperatures are achieved through two ceramic heating plates on either side of the chamber to provide optimal temperature uniformity.
- External temperatures are kept low thanks to a dual shell housing and fiber insulation. The controller present on the furnace is a B410.
- Excellent workmanship
- advanced, attractive design
- highest level of reliability.
-
Sale!Translucency is 49%, so suitable for anterior crownwork. Single crowns in any situation and up to three units in the anterior region. Shades are well matched to the Vita shade guide. Strength is and average of 600 MPa. Click here for VividMax instructions. Click here for quality certification.
-
Only available for dongles registered to Bristol CadCam (transfer possible), and dongle must have an active contract.
-
Nabertherm LHTCT 01 16 Furnace
The Nabertherm LHTCT 01 16 Furnace is a High-Temperature Furnace with SiC Rod Heating for Sintering Zirconia up to 1550 °C- Tmax 1550 °C
- Working temperature 1500 °C, increased wear and tear must be expected in case of working at higher temperatures
- Single-phase connection (LHTCT 01/16)
- Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
- Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2
- Scope of delivery includes a starter set for charging on one level, additional levels as additional equipment
- Adjustable air inlet
- Type S thermocouple
- Controller C450, freely programmable
- Switching system with solid-state-relays, power tuned to the SiC rods
- Easy replacement of heating rods
- Defined application within the constraints of the operating instructions
- NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
-
This white zirconia has strength (1200 MPa) and opacity. Suitable for all frameworks including full mouth. The best choice when full covering power is sometimes needed and only a thin section is possible in the space available. Click here for quality certification. Click here for Vivid user instructions.
-
Please note this is for a flex license
Only available for dongles registered to Bristol CadCam (transfer possible), and dongle must have an active contract. -
Due to their maximum temperature of 1650 degrees C and their large furnace chamber, the high-temperature bottom loading furnaces are perfectly suited for sintering translucent zirconia.
- Motor-driven lifting table significantly simplifies the charging of the high-temperature furnace.
- All-around heating of the cylindrical furnace chamber ensures a very even temperature uniformity.
- Equipped with special heating elements made of molybdenum disilicide, chemical interactions between the charge and the furnace components are optimally avoided.
- The sintered material is placed in saggars made of technical ceramics
- The LHT 02/17 LB offers space for up to three saggars for a maximum of 25 individual crowns per level, thus guaranteeing high productivity.
-
Sale!Roland flat end burs. We stock a range of PMMA/Wax and Zirconia milling tools. Get in touch to discuss your needs, we are always happy to help.
-
Accurate shade determination for natural dentition and a variety of restorations
-
Only available for dongles registered to Bristol CadCam (transfer possible), and dongle must have an active contract.
-
- High-temperature furnace ideally suited for sintering bridges and crowns
- Made of translucent zirconia
- Special heating elements made of molybdenum disilicide promise the best possible protection against chemical interaction between the charge and the furnace components
- Bridges and crowns are loaded in ceramic saggars.
-
Roland DWX (Wet) Milling Tools are high precision milling tools for Roland 4W milling machines. These tools are manufactured in Germany using high precision Swiss mills. Their long life and smooth cutting make these burs a very cost-effective choice for the dental industry. We stock a range of PMMA/Wax and Zirconia burs, get in touch to discuss your needs, we are always happy to talk.
-
Only available for dongles registered to Bristol CadCam (transfer possible), and dongle must have an active contract.
-
Cleaning Tool for DWX-52DC Use the Roland DWX-52DC to remove material waste from all milled dental prosthesis. Place in ATC slot 16 and manually select for use in approved CAM software.
-
Features/Benefits
In order to operate the furnace, you will need the VITA vPad comfort or VITA vPad excellence control unit.* *An offer is currently available for the VITA ZYRCOMAT® 6100 MS and VITA vPad comfort. Please click here to view -
Only available for dongles registered to Bristol CadCam (transfer possible), and dongle must have an active contract.
